INOXPA S.A.U.

C/ Telers, 60

17820 Banyoles, Spain

MBC Double Cone Blender

Information

MBC Double Cone Blender

The double cone blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as food, cosmetics, pharmaceutical, chemical, detergents, fertilizers and plastics.

Examples of materials or substances mixed in this way include pharmaceutical granules, semolina flour, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations to make dehydrated soups and creams, leaf waxes, detergent granules, soap flakes, artificial fertilizers, plastic in powder, ground or pellet form, fibreglass, etc.

Information

MBC Double Cone Blender

Principe de fonctionnement

The main body of the blender consists of two cone-shaped sections welded at their bases to a central cylindrical section. The axis of rotation is perpendicular to the cone axis and passes through the cylindrical section. The driving motor is located at one of the two lateral supports holding the blender body.

The solids are introduced into the blender through the loading aperture. In this type of blender, mixing takes place axially, as a result of the powder moving through the different sections. Mixing is thorough but it depends on the rotating speed.

The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Conception et caractéristiques

The series consists of 6 models with a total capacity of 160 to 4200 litres and a useful capacity of 65% of the total.
This blender is especially designed for sensitive mixtures with risk of breakage where the generation of dusts is to be avoided. Mixing times vary between 5 and 20 minutes depending on the mixture.
There are two apertures: the loading and cleaning aperture, and the discharge opening, which incorporates a butterfly valve thatcan be operated automatically or manually.
The apertures are sealed hermetically in order to avoid contamination from the outside during the mixing process.
The interior of the blender incorporates a cone mounted on the pivot axis on both sides. This system eliminates the formation of dead spaces and facilitates gravity discharge.

The unit is manufactured in AISI 316 (EN 14404) quality for all parts in contact with the product and AISI 304 (EN 14301) for the supports and the rest of the equipment. The internal and external surfaces have a bright polished finish.
Due to the polished surface and absence of edges or corners, the unit can be easily cleaned either manually or automatically with CIP system.
The unit incorporates a guard rail with electrical safety, according to EC safety standards.
The motors and electrical panels are available in standard or ATEX protection.
It allows the addition of liquid additives depending on the product to be mixed. Normally, these liquids are added in spray form in order to affect the largest number of particles in the mixture, thereby increasing efficiency.
The system offers a clear added value. The unit’s large production capacity, the high quality of the resulting mixture, and the low energy and maintenance costs directly contribute to an increase in profitability.
On request, the loading and discharge systems can be automated with a butterfly valve with pneumatic dosing system.
This equipment has been designed -in contrast to the “V”-type blender- to handle mixtures of granulated products and powders, or mixtures of products with high and different densities, with a loading of 65% of the total capacity of the equipment, unlike the 50% loading in a “V”-type blender, which handles mixtures of powders with the same bulk density.

Matériels

Parts in contact with the product AISI 316 (EN 14404)
Structure and other metal parts AISI 304 (EN 14301)
Internal finish Bright polish
External finish Bright polish

Options

This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable displacement pump at constant pressure.
The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
self-cleaning filter; as well as a control panel for the unit.
The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.

Document

Principe de fonctionnement

The main body of the blender consists of two cone-shaped sections welded at their bases to a central cylindrical section. The axis of rotation is perpendicular to the cone axis and passes through the cylindrical section. The driving motor is located at one of the two lateral supports holding the blender body.

The solids are introduced into the blender through the loading aperture. In this type of blender, mixing takes place axially, as a result of the powder moving through the different sections. Mixing is thorough but it depends on the rotating speed.

The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically.
The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

Matériels and Options

Parts in contact with the product AISI 316 (EN 14404)
Structure and other metal parts AISI 304 (EN 14301)
Internal finish Bright polish
External finish Bright polish

This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable displacement pump at constant pressure.
The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point.
The unit can be equipped with an automated loading system for introducing powders and granules into the blender body by means of a vacuum unit with self-cleaning hoses. It prevents creation of dust.
The skid can also be provided with a complete monoblock vacuum unit with liquid ring pump.
It is possible to install an automated vacuum discharge system. It includes a product receiving hopper with an automated
self-cleaning filter; as well as a control panel for the unit.
The loading/discharge can be carried out with pneumatically actuated retractable hermetic bellows. This system and the vacuum loading/discharge can be combined.

Document N° FTsolMBC_ES
Titre Mezclador Tipo Bicónico MBC
Type de fichier .pdf
    Download
  • E-mail
Document N° FTsolMBC_EN
Titre Double Cone Solids Blender MBC
Type de fichier .pdf
    Download
  • E-mail
Document N° FTsolMBC_IT
Titre Mescolatore Tipo Biconico MBC
Type de fichier .pdf
    Download
  • E-mail
Document N° FTsolMBC_PT
Titre Misturador de Tipo Bicónico MBC
Type de fichier .pdf
    Download
  • E-mail
Document N° FTsolMBC_RU
Titre Блендер Двухконусного Типа MBC
Type de fichier .pdf
    Download
  • E-mail
Document N° FA.MBC.1_ES
Titre MBC: Mezcla de productos en polvo
Type de fichier .pdf
Résumé El proceso de mezcla de dos o más productos sólidos, con o sin adición de líquidos, se puede realizar en tres equipos diferentes en función de su granulometría y el proceso de fabricación.
    Download
  • E-mail
Document N° FA.MBC.1_EN
Titre MBC: Mixing of Products in Powder Form
Type de fichier .pdf
Résumé The process of mixing two or more solid products, with or without addition of liquids, can be performed in three different skids depending on their grain size and the manufacturing process
    Download
  • E-mail

Politique de cookies

Ce site web utilise des cookies. Les cookies nous permettent de personnaliser le contenu et les annonces, d'offrir des fonctionnalités relatives aux médias sociaux et d'analyser notre trafic. Nous partageons également des informations sur l'utilisation de notre site avec nos partenaires de médias sociaux, de publicité et d'analyse, qui peuvent combiner celles-ci avec d'autres informations que vous leur avez fournies ou qu'ils ont collectées lors de votre utilisation de leurs services. Cependant, le blocage de certains types de cookies peut affecter votre expérience sur le site et les services que nous pouvons offrir. Page de politique des cookies

Autoriser tous les cookies
Autoriser la sélection
Nécessaires (2)
Préférences (0)
Statistiques (7)
Marketing (11)
About cookies

Les cookies nécessaires contribuent à rendre un site web utilisable en activant des fonctions de base comme la navigation de page et l'accès aux zones sécurisées du site web. Le site web ne peut pas fonctionner correctement sans ces cookies.

Les cookies de préférences permettent à un site web de retenir des informations qui modifient la manière dont le site se comporte ou s’affiche, comme votre langue préférée ou la région dans laquelle vous vous situez. Nous n'utilisons pas de cookies de ce type.

Les cookies statistiques aident les propriétaires du site web, par la collecte et la communication d'informations de manière anonyme, à comprendre comment les visiteurs interagissent avec les sites web.

Les cookies marketing sont utilisés pour effectuer le suivi des visiteurs au travers des sites web. Le but est d'afficher des publicités qui sont pertinentes et intéressantes pour l'utilisateur individuel et donc plus précieuses pour les éditeurs et annonceurs tiers.

Nom Fournisseur Objectif Expiration Type
cc_cookie_accept www.inoxpa.dz Stocke l'autorisation d'utilisation de cookies pour le domaine actuel par l'utilisateur 1 année HTTP
PHPSESSID www.inoxpa.dz Préserve l'état de la session utilisateur à travers les demandes de page. Session HTTP
collect Google Utilisé pour envoyer des données à Google Analytics sur l'appareil et le comportement du visiteur. Suit le visiteur à travers les appareils et les canaux marketing. Session Pixel
_ga Google Enregistre un identifiant unique utilisé pour générer des données statistiques sur la façon dont le visiteur utilise le site Web. 2 années HTTP
_ga_# www.inoxpa.dz Utilisé par Google Analytics pour collecter des données sur le nombre de fois qu'un utilisateur a visité le site Web ainsi que les dates de la première et la plus récente visite. 2 années HTTP
_gat_ Google Utilisé par Google Analytics pour réduire le taux de demandes Un jour HTTP
_gid Google Enregistre un identifiant unique utilisé pour générer des données statistiques sur la façon dont le visiteur utilise le site Web. Un jour HTTP
fr Facebook Enregistre un identifiant unique utilisé pour générer des données statistiques sur la façon dont le visiteur utilise le site Web. 3 mois HTTP
_fbp Facebook Enregistre un identifiant unique utilisé pour générer des données statistiques sur la façon dont le visiteur utilise le site Web. 3 mois HTTP
IDE Google Utilisé par Google DoubleClick pour enregistrer et signaler les actions de l'utilisateur du site Web après avoir vu ou cliqué sur l'une des annonces de l'annonceur dans le but de mesurer l'efficacité d'une annonce et de présenter des annonces ciblées à l'utilisateur. 1 année HTTP
ads/ga-audiences Google Used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor's online behaviour across websites. Session Pixel
VISITOR_INFO1_LIVE YouTube Utilisé par Google AdWords pour réengager les visiteurs susceptibles de se convertir en clients en fonction du comportement en ligne du visiteur sur les sites Web. 179 jours HTTP
YSC YouTube Enregistre un identifiant unique pour conserver des statistiques sur les vidéos de YouTube vues par l'utilisateur. Session HTTP
yt-remote-cast-installed YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Session HTML
yt-remote-connected-devices YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Persistant HTML
yt-remote-device-id YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Persistant HTML
yt-remote-fast-check-period YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Session HTML
yt-remote-session-app YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Session HTML
yt-remote-session-app YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Session HTML
yt-remote-session-name YouTube Stocke les préférences de lecture vidéo de l'utilisateur pour les vidéos YouTube incorporées Session HTML
Les cookies sont des petits fichiers textes qui peuvent être utilisés par les sites web pour rendre l'expérience utilisateur plus efficace. La loi stipule que nous ne pouvons stocker des cookies sur votre appareil que s’ils sont strictement nécessaires au fonctionnement de ce site. Pour tous les autres types de cookies, nous avons besoin de votre permission. Ce site utilise différents types de cookies. Certains cookies sont placés par les services tiers qui apparaissent sur nos pages. À tout moment, vous pouvez modifier ou retirer votre consentement dès la Déclaration relative aux cookies sur notre site web. En savoir plus sur qui nous sommes, comment vous pouvez nous contacter et comment nous traitons les données personnelles veuillez voir notre Politique confidentialité. Veuillez indiquer l'identifiant de votre consentement et la date à laquelle vous nous avez contactés concernant votre consentement.